BD Diesel ProTect68 Pressure Control Kit - Dodge 2007.5-2016 6.7L 68RFE Transmission - 1030362

ProTect68 Trans Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Dodge	Ram 2500	Laramie
2007-2010	Dodge	Ram 2500	SLT
2007-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2008-2010	Dodge	Ram 3500	Laramie
2008-2010	Dodge	Ram 3500	SLT
2008-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2013-2019	Ram	2500	Big Horn
2011-2019	Ram	2500	Laramie
2014-2015	Ram	2500	Laramie Limited
2011-2019	Ram	2500	Laramie Longhorn
2016-2019	Ram	2500	Limited
2013-2015,2019	Ram	2500	Lone Star
2012-2016	Ram	2500	Outdoorsman
2011-2018	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013-2019	Ram	2500	Tradesman
2013-2019	Ram	3500	Big Horn
2011-2019	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2019	Ram	3500	Laramie Longhorn
2016-2019	Ram	3500	Limited
2013-2015,2017,2019	Ram	3500	Lone Star
2011-2019	Ram	3500	SLT
2011-2013	Ram	3500	ST
2013-2019	Ram	3500	Tradesman