Edelbrock Pro Flo 4 Fuel Injection Kit Seq Port BBF 429/460 68-87 625 Max HP 35 LbHr Injectors Satin - 35680

The new Pro-Flo 4 EFI System #35680 for Ford 429/460 engines is an advanced sequential-port electronic fuel injection for the 385-series big-blocks manufactured from 1968 through 1987. This EFI is a direct bolt on and incorporates a single-plane Victor-style intake manifold with a square-bore 4150-style throttle body. The Pro-Flo 4 EFI #35680 is compatible with factory-style cylinder heads but optimized for use with Edelbrock Performer and Victor Jr. heads. The Pro-Flo 4 manifold comes preassembled and ready to run with throttle body, 42 lb/hr injectors and fuel rails. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential direct-port injection and infinite control over ignition and fuel events under all conditions. This system is rated for 625 horsepower at 43 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet included for a streamlined installation. Key Pro-Flo 4 advancements are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app that comes preinstalled on the tablet. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI requires no laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration for maximum performance by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.

Please note image may vary from product. Also some parts are special order, may take longer, and cannot be canclled. If delivery time is a concern, please contact us prior to purchase. 

Fidanza Performance is excited to offer the go to name in performance- Edlebrock!

About Edelbrock

Edelbrock was founded in 1938 by Vic Edelbrock Sr. in Los Angeles, California. Initially, the company focused on producing performance parts, with Vic's first major success being a high-performance intake manifold designed for flathead V8 engines. This innovation helped enhance engine efficiency and performance, laying the foundation for the company's reputation in the automotive aftermarket. Vic's love for racing also played a significant role in the early development of Edelbrock, as he designed parts to improve the speed and power of his own cars.

By the 1950s and 1960s, Edelbrock began to expand its product offerings, moving beyond intake manifolds to include carburetors, camshafts, and other components essential for performance cars. The company gained recognition in the burgeoning hot rod and drag racing scenes, particularly in California, where racing culture was rapidly growing. Edelbrock's products were highly regarded for their quality and performance, earning the company a loyal following among car enthusiasts and racers.

During the 1970s, the company solidified its position as a leader in the performance parts industry. With Vic Edelbrock Jr. joining the business, Edelbrock expanded its reach beyond racing into the street performance market, offering a variety of parts for muscle cars and street machines. The Edelbrock carburetor became a go-to choice for enthusiasts looking to boost engine performance, and the company continued to innovate, expanding its product line to meet the growing demands of car enthusiasts.

The 1980s and 1990s marked a period of continued growth for Edelbrock as the company advanced with cutting-edge technologies, such as the introduction of electronic fuel injection (EFI) systems and aluminum cylinder heads. Edelbrock was a key player in motorsports, supporting events in NASCAR, NHRA drag racing, and circle track racing. The company's emphasis on technological innovation helped it remain at the forefront of the performance parts industry.

In the 2000s, Edelbrock adapted to modern advancements in manufacturing, utilizing CNC-machining and computer modeling for greater precision in its products. The company also expanded its portfolio, delving into areas like superchargers, performance exhaust systems, and automotive electronics. As the market shifted, Edelbrock continued to develop high-performance parts to meet the needs of both racers and car enthusiasts.

In 2020, Edelbrock was acquired by Icahn Enterprises, a holding company controlled by investor Carl Icahn. Despite this change in ownership, Edelbrock has maintained its legacy as a trusted brand in automotive performance. The company continues to innovate with new products and technologies, ensuring that it remains a leader in the automotive aftermarket space.

Today, Edelbrock is a globally recognized name in the automotive performance industry. The company’s long history of innovation, dedication to quality, and commitment to performance has earned it a loyal customer base that includes racing professionals, car builders, and hobbyists alike. From its humble beginnings to its current standing as a giant in the performance parts world, Edelbrock’s legacy of excellence continues to shape the automotive landscape.

Fidanza Performance, founded in 1997, is a leading US manufacturer of high-quality lightweight aluminum flywheels, precision adjustable cam gears, and high-performance clutches. With nearly 20 years in the automotive performance market, Fidanza is renowned for its expertise and respected globally, offering products for a wide range of vehicles, from European sports cars to modern muscle cars and imports. The company originated in racing, with founder Lou Fidanza's success in the SCCA leading to the creation of specialty parts like aluminum flywheels. Fidanza has since expanded its product line to include cam gears and performance clutches, gaining a loyal customer base and worldwide recognition. In 2023 Fidanza opened the SpeedParts4Less Marketplace which sells other manufacturers quality high performance parts!