Buy Flanges at Fidanza Performance

Forced Performance Mitsubishi Evo 8/9 76mm DP Inlet Flange - 740.300.201

MSRP:

Was:

Now: $57.00
Forced Performance S400 T6 Marmon Outlet Flange 5in ID - 2759310

MSRP:

Was:

Now: $56.00

Add to Cart
Forced Performance S400 T6 Marmon Outlet Flange 4in ID - 2759300

MSRP:

Was:

Now: $54.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 4in ID - 2759220

MSRP:

Was:

Now: $36.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 3.5in ID - 2759210

MSRP:

Was:

Now: $32.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 3in ID - 2759200

MSRP:

Was:

Now: $28.00

Add to Cart
Forced Performance T4 Turbine Housing Outlet Flange - 2759060

MSRP:

Was:

Now: $42.00
Forced Performance S400/HD T4 1.25 Clamp & Flange Kit - 2759055

MSRP:

Was:

Now: $69.00

Add to Cart
Forced Performance DSM Flanged Vehicle V3 68HTA UHF Turbo 58mm CH8CM Turbine Hsg Internal WG - 2019000

MSRP:

Was:

Now: $1,299.00

Add to Cart
Forced Performance Male V-Band Flange Garrett 3.0in ID - 002501

MSRP:

Was:

Now: $45.20
Camburg 1.00 Uniball Replacement Kit (Pair) - CAM-010046

MSRP:

Was:

Now: $137.66
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077

MSRP:

Was:

Now: $355.06
Camburg 2.50 Rear LHT 4130HT Snout (4.00 x .250) - CAM-020076

MSRP:

Was:

Now: $355.06
Camburg 2.50 Rear RHT 4130HT Snout (3.50 x .250) - CAM-020061

MSRP:

Was:

Now: $327.75
Camburg 2.50 Rear LHT 4130HT Snout (3.50 x .250) - CAM-020060

MSRP:

Was:

Now: $327.75
Camburg 3.25 Rear RHT 4130 Snout (4.00 x .250) - CAM-020015

MSRP:

Was:

Now: $382.37
Camburg 3.25 Rear LHT 4130 Snout (4.00 x .250) - CAM-020014

MSRP:

Was:

Now: $382.37
Camburg 2.25 Rear RHT 4130 Snout (3.50 x .250) - CAM-020008

MSRP:

Was:

Now: $245.81
Camburg 2.25 Rear LHT 4130 Snout (3.50 x .250) - CAM-020007

MSRP:

Was:

Now: $245.81
Camburg 4130 TT Bolt-on Spindle Snout Block - CAM-010061

MSRP:

Was:

Now: $327.75
Camburg 2.50 Front RHT 4340HT Bolt-on Snout - CAM-010022

MSRP:

Was:

Now: $431.54
Camburg 2.50 Front LHT 4340HT Bolt-on Snout - CAM-010021

MSRP:

Was:

Now: $431.54
Camburg 4130 SQ. Bolt-on Spindle Snout Block - CAM-010018

MSRP:

Was:

Now: $152.95
Camburg 2.25 Front RHT 4140HT Bolt-on Snout - CAM-010017

MSRP:

Was:

Now: $322.29

Forced Performance Mitsubishi Evo 8/9 76mm DP Inlet Flange - 740.300.201

Forced Performance Mitsubishi Evo 8/9 76mm DP Inlet Flange

MSRP:

Was:

Now: $57.00
Forced Performance S400 T6 Marmon Outlet Flange 5in ID - 2759310

Forced Performance S400 T6 Marmon Outlet Flange 5in ID

MSRP:

Was:

Now: $56.00

Add to Cart
Forced Performance S400 T6 Marmon Outlet Flange 4in ID - 2759300

Forced Performance S400 T6 Marmon Outlet Flange 4in ID

MSRP:

Was:

Now: $54.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 4in ID - 2759220

Forced Performance S400 CH Outlet V-Band Flange 4in ID

MSRP:

Was:

Now: $36.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 3.5in ID - 2759210

Forced Performance S400 CH Outlet V-Band Flange 3.5in ID

MSRP:

Was:

Now: $32.00

Add to Cart
Forced Performance S400 CH Outlet V-Band Flange 3in ID - 2759200

Forced Performance S400 CH Outlet V-Band Flange 3in ID

MSRP:

Was:

Now: $28.00

Add to Cart
Forced Performance T4 Turbine Housing Outlet Flange - 2759060

Forced Performance T4 Turbine Housing Outlet Flange

MSRP:

Was:

Now: $42.00
Forced Performance S400/HD T4 1.25 Clamp & Flange Kit - 2759055

Forced Performance S400/HD T4 1.25 Clamp & Flange Kit

MSRP:

Was:

Now: $69.00

Add to Cart
Forced Performance DSM Flanged Vehicle V3 68HTA UHF Turbo 58mm CH8CM Turbine Hsg Internal WG - 2019000

Forced Performance DSM Flanged Vehicle V3 68HTA UHF Turbo 58mm CH8CM Turbine Hsg Internal WG

MSRP:

Was:

Now: $1,299.00

Add to Cart
Forced Performance Male V-Band Flange Garrett 3.0in ID - 002501

Forced Performance Male V-Band Flange Garrett 3.0in ID

MSRP:

Was:

Now: $45.20
Camburg 1.00 Uniball Replacement Kit (Pair) - CAM-010046

This kit is what's required to rebuild the uniballs in your Camburg upper arms, spindles and lower arm inner pivots. The kit includes two FK 1.00" uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. For optimum...

MSRP:

Was:

Now: $137.66
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077

These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them heat-treated for increased strength and surface hardness and...

MSRP:

Was:

Now: $355.06
Camburg 2.50 Rear LHT 4130HT Snout (4.00 x .250) - CAM-020076

These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them heat-treated for increased strength and surface hardness and...

MSRP:

Was:

Now: $355.06
Camburg 2.50 Rear RHT 4130HT Snout (3.50 x .250) - CAM-020061

These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them heat-treated for increased strength and surface hardness and...

MSRP:

Was:

Now: $327.75
Camburg 2.50 Rear LHT 4130HT Snout (3.50 x .250) - CAM-020060

These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them heat-treated for increased strength and surface hardness and...

MSRP:

Was:

Now: $327.75
Camburg 3.25 Rear RHT 4130 Snout (4.00 x .250) - CAM-020015

These 3.25 hub snouts are CNC machined in-house from aircraft quality 4130 chromoly. Our manufacturing process on these gives you the best product available. Starting with a 4" billet 4130 bar we machine them to rough dimensions of the final part. We...

MSRP:

Was:

Now: $382.37
Camburg 3.25 Rear LHT 4130 Snout (4.00 x .250) - CAM-020014

These 3.25 hub snouts are CNC machined in-house from aircraft quality 4130 chromoly. Our manufacturing process on these gives you the best product available. Starting with a 4" billet 4130 bar we machine them to rough dimensions of the final part. We...

MSRP:

Was:

Now: $382.37
Camburg 2.25 Rear RHT 4130 Snout (3.50 x .250) - CAM-020008

These 2.25 hub spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. These are also what we use in our complete rear ends that utilize our 2.25 hubs. These are complete and include the locking nut and hardware. We have updated...

MSRP:

Was:

Now: $245.81
Camburg 2.25 Rear LHT 4130 Snout (3.50 x .250) - CAM-020007

These 2.25 hub spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. These are also what we use in our complete rear ends that utilize our 2.25 hubs. These are complete and include the locking nut and hardware. We have updated...

MSRP:

Was:

Now: $245.81
Camburg 4130 TT Bolt-on Spindle Snout Block - CAM-010061

Looking to build your own spindles/uprights using a bolt-on hub spindle snout? Our TT spindle snout block is CNC machined in-house from aircraft quality 4130 chromoly that’s 5/8" thick. It’s 5" x 7.25" and uses the industry standard Dana 44 bolt pattern...

MSRP:

Was:

Now: $327.75
Camburg 2.50 Front RHT 4340HT Bolt-on Snout - CAM-010022

These 2.50 spindle snouts are designed for our Camburg 2.50 front hubs. We CNC machine them in-house from aircraft quality US 4340 chromoly. Our manufacturing process on these gives you the best product available. Starting with a 5" billet 4340 bar we...

MSRP:

Was:

Now: $431.54
Camburg 2.50 Front LHT 4340HT Bolt-on Snout - CAM-010021

These 2.50 spindle snouts are designed for our Camburg 2.50 front hubs. We CNC machine them in-house from aircraft quality US 4340 chromoly. Our manufacturing process on these gives you the best product available. Starting with a 5" billet 4340 bar we...

MSRP:

Was:

Now: $431.54
Camburg 4130 SQ. Bolt-on Spindle Snout Block - CAM-010018

Looking to build your own spindles/uprights using a bolt-on hub spindle snout? Our spindle snout block is CNC machined in-house from aircraft quality 4130 chromoly that's 1/2" thick. It's 5" x 5" and uses the industry standard Dana 44 bolt pattern that...

MSRP:

Was:

Now: $152.95
Camburg 2.25 Front RHT 4140HT Bolt-on Snout - CAM-010017

These 2.25 spindle snouts are designed for our Camburg 2.25 front hubs. We CNC machine them in-house from aircraft quality 4140 heat-treated chromoly. These use the industry standard Dana 44 bolt pattern, that has been doubled up (12 on 4.00").These are...

MSRP:

Was:

Now: $322.29