Buy Drain Plugs at Fidanza Performance

Camburg 01-10 Chevy/GMC 2500/3500 HD 2wd/4wd Steering Upgrade Kit - CAM-230002

MSRP:

Was:

Now: $491.62
Camburg 3/4in. LHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040139

MSRP:

Was:

Now: $19.67
Camburg 1in. LHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040138

MSRP:

Was:

Now: $21.85
Camburg 1in. RHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040137

MSRP:

Was:

Now: $21.85
Camburg 1in. LHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040136

MSRP:

Was:

Now: $21.85
Camburg 7/8in. LHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040135

MSRP:

Was:

Now: $19.67
Camburg 7/8in. RHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040134

MSRP:

Was:

Now: $19.67
Camburg 5/8in. LHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040133

MSRP:

Was:

Now: $19.67
Camburg 5/8in. RHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040132

MSRP:

Was:

Now: $19.67
Camburg 1/2in. RHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040128

MSRP:

Was:

Now: $19.67
Camburg KINETIK Large Filler Cap Kit (alum/steel) - CAM-040127

MSRP:

Was:

Now: $103.79
Camburg 1in. x 5/8in. Hi-misalignment Spacers (pair) - CAM-040119

MSRP:

Was:

Now: $27.31
Camburg 1.25in. x 5/8in. Hi-misalignment Spacers (pair) - CAM-040094

MSRP:

Was:

Now: $43.70
Camburg 1.25in. 4130 Uniball Cup - CAM-040093

MSRP:

Was:

Now: $32.78
Camburg 1in. Med 4130 Uniball Cup (1.875in. width) - CAM-040080

MSRP:

Was:

Now: $27.31
Camburg 1in. x 1/2in. Tall Hi-misalignment Spacers (pair) - CAM-040067

MSRP:

Was:

Now: $27.31
Camburg 3/4in. x 1/2in. Hi-misalignment Spacers (pair) - CAM-040035

MSRP:

Was:

Now: $19.67
Camburg 7/8in. x 1/2in. Tall Hi-misalignment Spacers (pair) - CAM-040033

MSRP:

Was:

Now: $24.03
Camburg 7/8in. x 1/2in. Hi-misalignment Spacers (pair) - CAM-040032

MSRP:

Was:

Now: $24.03
Camburg 1in. x 5/8in. Tall Hi-misalignment Spacers (pair) - CAM-040031

MSRP:

Was:

Now: $27.31
Camburg 1in. x 3/4in. Hi-misalignment Spacers (pair) - CAM-040030

MSRP:

Was:

Now: $27.31
Camburg 1.50in. x 3/4in. Hi-misalignment Spacers (pair) - CAM-040029

MSRP:

Was:

Now: $54.62
Camburg 1in. Wide 4130 Uniball Cup (2.50in. width) - CAM-040026

MSRP:

Was:

Now: $32.78
Camburg 1in. 4130 Uniball Cup (1.50in. width) - CAM-040025

MSRP:

Was:

Now: $21.85

Camburg 01-10 Chevy/GMC 2500/3500 HD 2wd/4wd Steering Upgrade Kit - CAM-230002

This new steering upgrade is made with strength and wheel travel in mind. This is a must if you are looking at driving your HD off Road and have a lifted truck. We do not use a heim steering upgrade for this truck as it will add too much bump steer and...

MSRP:

Was:

Now: $491.62
Camburg 3/4in. LHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040139

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg 1in. LHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040138

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $21.85
Camburg 1in. RHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040137

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $21.85
Camburg 1in. LHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040136

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $21.85
Camburg 7/8in. LHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040135

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg 7/8in. RHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040134

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg 5/8in. LHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040133

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg 5/8in. RHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040132

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg 1/2in. RHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040128

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

MSRP:

Was:

Now: $19.67
Camburg KINETIK Large Filler Cap Kit (alum/steel) - CAM-040127

Here's the same filler cap kit we use on all our KINETIK race trucks and Camburg 4" rear end housings. The cap is CNC machined from 6061 aluminum, then anodized and laser engraved. It uses an O-ring seal to the steel threaded bung. The caps knurled...

MSRP:

Was:

Now: $103.79
Camburg 1in. x 5/8in. Hi-misalignment Spacers (pair) - CAM-040119

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $27.31
Camburg 1.25in. x 5/8in. Hi-misalignment Spacers (pair) - CAM-040094

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $43.70
Camburg 1.25in. 4130 Uniball Cup - CAM-040093

If you're looking to build your own upper/lower arms, spindles or links we have what you're looking for. We CNC machine our uniball cups in-house from US 4130 chromoly, not cheap mild steel or imported materials. Unlike most other companies we also...

MSRP:

Was:

Now: $32.78
Camburg 1in. Med 4130 Uniball Cup (1.875in. width) - CAM-040080

If you're looking to build your own upper/lower arms, spindles or links we have what you're looking for. We CNC machine our uniball cups in-house from US 4130 chromoly, not cheap mild steel or imported materials. Unlike most other companies we also...

MSRP:

Was:

Now: $27.31
Camburg 1in. x 1/2in. Tall Hi-misalignment Spacers (pair) - CAM-040067

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $27.31
Camburg 3/4in. x 1/2in. Hi-misalignment Spacers (pair) - CAM-040035

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $19.67
Camburg 7/8in. x 1/2in. Tall Hi-misalignment Spacers (pair) - CAM-040033

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $24.03
Camburg 7/8in. x 1/2in. Hi-misalignment Spacers (pair) - CAM-040032

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $24.03
Camburg 1in. x 5/8in. Tall Hi-misalignment Spacers (pair) - CAM-040031

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $27.31
Camburg 1in. x 3/4in. Hi-misalignment Spacers (pair) - CAM-040030

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $27.31
Camburg 1.50in. x 3/4in. Hi-misalignment Spacers (pair) - CAM-040029

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength and mis-alignment angles for the specific bolt sizes...

MSRP:

Was:

Now: $54.62
Camburg 1in. Wide 4130 Uniball Cup (2.50in. width) - CAM-040026

If you're looking to build your own upper/lower arms, spindles or links we have what you're looking for. We CNC machine our uniball cups in-house from US 4130 chromoly, not cheap mild steel or imported materials. Unlike most other companies we also...

MSRP:

Was:

Now: $32.78
Camburg 1in. 4130 Uniball Cup (1.50in. width) - CAM-040025

If you're looking to build your own upper/lower arms, spindles or links we have what you're looking for. We CNC machine our uniball cups in-house from US 4130 chromoly, not cheap mild steel or imported materials. Unlike most other companies we also...

MSRP:

Was:

Now: $21.85