free shipping on orders over $300 (48 State US)

phone: 440-259-5581
  • Photo - Primary Photo - Primary Photo - Primary Photo - out of package User 9

    Edelbrock Manifold Top Only Vr 660 - 7073

    Edelbrock part #7073 Victor Ram Top is for use on Small Block Chevrolets with 4150 series carburetors (sideways mounting) and our Victor Ram base manifold #7075 only. The Edelbrock Victor Ram 23 degree top also features a natural aluminum finish for a...

    $185.60
  • Photo - Primary Photo - Primary Photo - Primary User 9 Technical Drawing

    Edelbrock Manifold Bottom Victor Ram - 7070

    Edelbrock part #7070 Victor Ram 23-degree for Small-Block Chevy is a tunnel ram manifold base for the control of high velocity mixture flow, especially above 8500 rpm. Suited to drag race engines operating at 6500-10,000 rpm and race boat engines above...

    $581.76
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 1

    Edelbrock Performer GM Corp V-6 - 5486

    Edelbrock part #5486 Performer Buick V6 intake manifold is designed for 1979 and later street 231/252 c.i.d. (252 c.i.d. 1980-84 only) Buick V6 engines with late-model cylinder heads. Manifold will not fit pre-1979 engines. Manifold not equipped with EGR...

    $368.50
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Chrysler 440 Ch-28 Manifold - 5440

    Edelbrock part #5440 Chrysler CH-28 Dual-Quad intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. Use with Performer-Plus cam #2192 for low-end torque or Performer RPM cam #7194 for top-end power. Will not fit 1962-64 Max Wedge heads. Carb...

    $506.60
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock C-26 Manifold - 5425

    Edelbrock part #5425 C-26 Dual-Quad intake manifold is for 1955-86 262-400 c.i.d. S/B Chevys. This dual-quad has a low profile for hood clearance on most vehicles. Air-conditioning bosses and front oil filler tube boss included. Stock alternator brackets...

    $504.69
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock C-357B Manifold - 5419

    Edelbrock part #5419 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers...

    $477.44
  • Photo - Primary Photo - Primary Photo - Primary Photo - out of package Technical Drawing

    Edelbrock Manifold Vintage Series C357B 3X2 - 5418

    Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers...

    $499.46
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II 440 Manifold - 5091

    Edelbrock part #5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.

    $375.64
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II 351-W Manifold - 5081

    Edelbrock part #5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit "Boss 351" Cleveland. Manifold not equipped with...

    $408.35
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II 360 Manifold - 5076

    Edelbrock part #5076 Torker II intake manifold is designed for high Performance's street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Will not fit 1992 and later Magnum...

    $430.90
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II 460 Manifold - 5066

    Edelbrock part #5056 Torker II 460 intake manifold is designed for 429/460 c.i.d. Ford V8's used in marine and high performance applications. Manifold not equipped with EGR. Will fit 429 Cobra-Jets. Manifold will not accept stock Motorcraft spread-bore...

    $455.61
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing Photo - out of package

    Edelbrock Torker II 2-O Manifold - 5061

    Edelbrock part #5061 Torker II 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier). Manifold not equipped with EGR. Will not fit "tall block" V8 engines. The Torker II 2-O intake...

    $425.13
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II Manifold Pontiac - 5056

    Edelbrock part #5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.

    $426.86
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II 302 Manifold - 5021

    Edelbrock part #5021 Torker II 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with...

    $362.57
  • Photo - Primary Photo - Primary Photo - Primary Technical Drawing User 9

    Edelbrock Torker II Manifold - 5001

    Edelbrock part #5001 Torker II intake manifold is designed for 1955-86 high-performance's street 262-400 c.i.d. small-block Chevys. This Torker manifold is a singe plane low rise intake that's great for high performance applications that have limited...

    $263.64
  • Photo - Primary Photo - Primary Photo - Primary Photo - Primary Technical Drawing

    Edelbrock Honda B16A Type R Race Manifold - 4764

    Edelbrock part #4764 Victor X intake manifold is designed for B16A & Type R B18C5 engines. This intake manifold is optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered...

    $574.49
  • Photo - Primary Photo - Primary Photo - Primary Photo - out of package Technical Drawing

    Edelbrock Honda B18C Race Manifold - 4760

    Edelbrock part #4760 Victor X intake manifold is designed for Integra GSR with B18C engine. This intake manifold is optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered...

    $542.87